Why doesnt the sprayer produce water?

1. Insufficient spray pressure and poor atomization:

If the sprayer water pump is held up by dirt due to the water inlet ball valve, the water inlet valve can be removed and the dirt can be removed with a cloth;

If the leather bowl is damaged, it can be replaced with a new leather bowl;

If the sealing ring is not installed at the connection part, or the air leaks due to the damage of the sealing ring, the sealing ring can be installed or replaced.

2. Can not be sprayed into mist:

If the oblique holes of the nozzle body are blocked by dirt, the oblique holes can be cleared; if the nozzle holes are blocked, the nozzle holes can be disassembled and cleaned, but hard objects such as iron wires or copper needles cannot be used to poke the nozzle holes to prevent the holes from expanding and improve the spray quality. become worse;

If the filter screen in the casing is blocked or the small ball of the water valve is put up, the filter screen and the dirt on the ball should be cleaned.

You can also check whether the battery is fully charged, whether the circuit is damaged, and whether the control valve and nozzle are blocked. In addition, the water pump of the electric sprayer is easily damaged, so the above items need to be checked in detail to troubleshoot!