Real copper pieces are the real "core"
PURE COPPER INDUCTION. REAL COPPER IS THE REAL CORE
Pure copper contact point, 304 stainless steel eccentric bearing, pure copper core, galvanized housing, 304 stainless steel, bearing, permanent magnet, pump head cut surface
Pure copper wire motor is more stable and reliable
Built-in thermal protection device to prevent burn-in damage
GOOD VISUAL QUALITY
LET YOU SEE THE QUALITY OF THE
Pure copper coil
Using copper wire to ensure the motor, safe, stable and efficient operation
Using high-quality copper impeller to avoid water pump corrosion
High precision rotor
Intelligent finishing, dynamic balance debugging
Smooth operation and extended service life
INTELLIGENT FINISHING, DYNAMIC BALANCE DEBUGGING
SMOOTH OPERATION AND PROLONG SERVICE LIFE
Precautions when using the smart dual-core pump:
(1) Note that when using the water pump, the working water should be clean, and there should be filtering equipment, otherwise the water pump will be blocked and the pressure will be reduced or even no water will be produced.
(2) After the water pump is finished, please work with clean water for another minute or two, so that the service life of the water pump will be longer.
(3) The water pump is not resistant to oil corrosion, so it cannot pump gasoline, diesel, kerosene and other oils.
(4) The working power supply of the pump is 12V DC, which is usually powered by a battery. It is strictly forbidden to use 220V AC.
Simple daily maintenance of intelligent dual-core pump
(1). Power on but the water pump does not rotate, check whether the wire behind the motor is off.
(2) The water pump can spray water when it rotates, but the amount of mist is small, and the pressure is low. Turn on the water pump, and check whether there is any debris in the pump cavity. If the motor bracket is loose, tighten the screws. Note that the inlet and outlet valves cannot be installed backwards.
(3). After the pump is used for half a year or a year, the pressure drop and the spray volume is small. Turn on the water pump and tighten the motor bracket screws. Change the direction of the small die in the cavity up and down, or replace the small diaphragm.
1. The sprayer water pump is divided into internal return water pump/return water pump/intelligent water pump, the difference between the three
Answer: There is a reflux device on the top of the reflux type. After reaching a certain pressure, the pressure can be relieved by means of reflux without suffocating the tube. The internal return does not have this function.
The intelligent pump has a pressure switch on the top. When the handle of the sprayer is closed, the pump will stop working. It has the function of turning off the gun and saving electricity and energy.
2. The sprayer pump does not produce water? Has the water in the pump been used by someone else?
A: Take off the two caps of the sprayer water pump first, and each water pump will be tested before delivery to check whether it is qualified or not, and the water pump will be better preserved.
3. How to wire this sprayer water pump?
A: This electric sprayer water pump is an intelligent single screw water pump connected with the same color line. Power requirements: generally 5a adapter, battery 8ah can be.
Address: Tangpu Village, Peng Street, Luqiao District, Taizhou City, Zhejiang Province
Mobile: 13968559999 18958629999