FAQ

A: The above parameters are tested under a single nozzle with 12V DC and 1.8MM aperture. The size of the aperture is different from the number of nozzles, and the data obtained from the test will also change. The rule is: the smaller the aperture, the greater the pressure; the greater the voltage, the greater the corresponding pressure and water flow. The intelligent water pump automatically stops when it reaches 0.6MPA, and the return pump automatically returns when it reaches 0.6MPA.

A: Don't say that other pumps of similar specifications on the market can reach 80W or 100W, etc. We suggest that the actual measurement data should prevail. The single machine is stronger than the dual-core, and you must pay attention to check the actual effective power. Seeking truth from facts, not deceiving, and not falsely standard is the last word.

A: The water pump itself does not use any additional accessories. You can choose the product that suits you according to your production needs. When purchasing, please pay attention to check the voltage of the water pump and related parameters such as inlet and outlet. After the beach is free to shoot back, it will cause problems such as voltage mismatch or failure to connect the water pipe correctly.

Answer: The current test results: The pump can be used to extract water, red wine, wine, alcohol, agricultural pesticides, general cleaning agents, etc. or liquids with weak acid-base properties and strong fluidity and few impurities (special attention: transparent pumps only It can extract water/wine without any corrosive or acidic or alkaline liquids!). However, due to the limitations of the test, we cannot conduct long-term destructive tests on all exciters of different concentrations on the market, so we cannot guarantee or promise you that a certain liquid must be pumpable or not.